DISK POWDER MEASURES

Lee Powder Measure
Fifteen uniformly graduated and proportioned powder dippers. Slide card shows the grains of powder each measure will dispense of every type of powder. Powder measures are inherently safe as they cannot get out of adjustment. That's why powder dippers continue to be the first choice of reloaders who load in small quantities.

Lee Powder Measure Kit 90100 

Powder Funnel A large, unbreakable funnel that fits all cases from .22 to .45 caliber. Hole in flange permits mounting to the Lee Turret Press, shelf or bench. Powder Funnel 90190  2.982.30

Micro Disk

Accurately measures small charges below the range of the standard Auto Disk Powder Measure. Six cavities range from 1.1 to 2.5 grains of Bullseye. This is an ideal kit for small caliber cases and light target loads.
Micro Disk and Spacer 90302  9.98 7.60

Double Disk Kit

This is a picture of the disks, They are not included with the double disk kit

This kit raises the hopper so you can stack two disks. This not only doubles the capacity of the disks but it makes very fine adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
Lee Double Disk Kit9019514.98 10.98

Lee Auto-Disk Powder Measure

Auto-Disk Powder Measures automatically dispense charges more uniformly than any other powder measure. The case itself actuates the measure as the neck is being flared. The measure is actuated during the presses maximum mechanical advantage. This assures the smooth, even action of the measure. Built-in baffle and precisely molded, glass reinforced charge disks contribute to the unmatched charge uniformity.
Lee Auto-Disk Powder Measure includes all four disks90578  33.98 21.20

Lee Pro Auto-Disk Powder Measure

Commercial reloaders or competitive shooters first choice! Elastomer wiper and teflon coated metal casting make this the smoothest operating measure. Will not cut powder and almost towally eliminates leakage. Large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience. Increased safety with positive pull-back lever. Includes swivel adapter and spring return lever with spring. Lee Pro Auto-Disk Powder Measure with all four disks
90429  52.00 33.98

Pro Auto-Disk Update Kit Update any Lee Auto-Disk Powder Measure with all the PRO features, except for the teflon coating. Includes oversize hopper and valve assembly with elastomer wiper, swivel adapter assembly for fast and easy transfer between die sets, pullback lever, chain and attachments, solid brass knurled thumb nuts. With FREE adjustable Charge Bar. Pro Auto-Disk Update Kit 90377  22.00 15.20

<Adjustable Charge Bar Infinitely adjustable between .28 and 1.6 cc. Lifetime nylon with solid brass, zero backlash micrometer. Easy to set. Lee Adjustable Charge Bar 90792  9.98 7.60

Lee Rifle Charging Die This die is used to charge small capacity rifle cases using the Auto-Disk Powder Measure. It works the same as the pistol powder through expanding dies except it doesn't expand the case mouth. Rifle case expansion is normally done in the sizing die. Lee Rifle Charging Die 90194   12.98 9.10

Auto Disk Pull Back Lever Pullback lever for progressive reloading. Eliminates the possibility of powder binding while reducing the chance of missed or double charges caused by operator error. Pull Back Lever and Chain90479  2.98 2.30

Swivel Adapter For fast and easy transfer between die sets. Screws into your die without rotating the measure. Allows precise positioning with firm clamping. Swivel Adapter90477  5.98 4.50

NOTE:
The Auto Disk powder measures must be used with the powder through expanding die supplied with all Lee pistol dies. These dies may be purchased individually. See listing of dies on Pistol Dies Page.

See What One Satisfied Customer Has To Say About The Auto Disk Powder Measure!

Dennis O. from East Peoria, IL:
I just want to say thank you for your fine line of reloading equipment. I usually don't write letters like this but I had to let you know how much I appreciate the reloading tools of Lee. Like so many others I started out with the Lee Loader, but now have moved up to one of your bench mounted presses with Lee dies, Auto-Disk Powder Measure and other Lee tools and accessories. The Auto-Disk Powder Measure is by far the best piece of reloading equipment for reloaders since the invention of the press itself, and now with the introduction of your new neck sizing dies, you've done it again. Several of these dies will be on my reloading bench very shortly.
I don't know what new products Lee will introduce in the months and years ahead but it's safe to say it will be part of my reloading bench. All this at a very affordable price. Lee, the innovative leader, how true that is. Keep up the good work.