![]() |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Rifle Neck Sizing Dies
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 17 REM | 90804 serv.parts | 22 HORNET | 90705 serv.parts |
| 22 PPC | 90803 serv.parts | 222 REM | 90706 serv.parts |
| 223 REM | 90707 serv.parts | 22/250 | 90708 serv.parts |
| 220 SWIFT | 90702 serv.parts | 243 WIN | 90709 serv.parts |
| 6mm PPC | 90802 serv.parts | 6mm REM | 90710 serv.parts |
| 257 ROBERTS | 90703 serv.parts | ||
| 260 Remington | 90974 serv.parts | 25/06 | 90711 serv.parts |
| 6.5 X 55 MAUSER | 90712 serv.parts | 270 WIN | 90713 serv.parts |
| 7 X 57 MAUSER | 90714 serv.parts | ||
| 7mm/08 | 90723 serv.parts | 7mm EXPRESS | 90724 serv.parts |
| 7mm REM MAG | 90720 serv.parts | 30/30 WIN | 90716 serv.parts |
| 308 WIN | 90718 serv.parts | 30/06 SPRINGFIELD | 90715 serv.parts |
| 300 WIN MAG | 90722 serv.parts | 300 H&H | 90726 serv.parts |
| 300 WHBY MAG | 90727 serv.parts | 7.62 X 39 RUSSIAN | 90701 serv.parts |
| 303 BRITISH | 90717 serv.parts | 8 X 57 MAUSER | 90719 serv.parts |
| 338 WIN | 90721 serv.parts | 35 REM | 90728 serv.parts |
| 375 H& H | 90729 serv.parts |

There
is no loading system that will load more accurate ammunition than Lee
Collet Dies.
We guarantee
it in writing with every set. No one but Lee has ever dared to make a
guarantee like this:
SMALLEST GROUP SIZE OR YOUR MONEY BACK!
A collet squeezes the
case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case
is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the
dies.
Maximum accuracy is
usually achieved by seating the bullet out far enough to touch or almost touch the
rifling. This provides the shot start pressure
normally supplied by the crimp. That's why
a dead length bullet seater is included to complete the most accurate reloading system
ever made.These dies size only the
neck to preserve the perfect fit of fire forming. Only reload cases that have been fired
in your gun.
Not recommended for autoloaders, slide or lever action guns.
Meet Some Satisfied Customers!
Leo writes:
I am pleased to report a
new "personal best" 3-shot group at a distance of 200 meters. The ammunition
used was put together using your custom collet die & dead length bullet seater. This
occurred during load development for upcoming silhouette competition.
Norm B. from Ontario, Canada:
I attended an NBRSA Shoot
at the Fairchance Gun Club in Pennsylvania April 21 & 22, 1990 and used a set of your
Collet dies, custom-made for my 6mm PPC with a 40 degree shoulder and a .263 neck
diameter.
I neck-sized in the
neck-sizing Collet die
and appreciated its easy adjustability for tightening up loosened
necks in much reloaded brass. My bullets were seated using your dead-length seating die.
In the heavy varmint 100
yard competition on Saturday, shooting conditions were good and I shot the smallest 5
group aggregate of my career. Range measure at .2008". This was good for third place
in a group of around 65 top shooters.
In the light varmint 100
yard ompetition in the afternoon the wind picked up a little and the groups shifted off
the center of the target. My .2230" aggregate score for 5 groups was good for second
place, just .0012" out of first place. Your dies performed as
good as or better than the hand dies that I have been using. They are more convenient to
use in some ways and treat the case necks less harshly. No competitor should feel at a
disadvantage using your Collet dies even though others around them stick to the more
costly hand dies.
| Lee Collet Dies | for neck sizing only |
|

While competing in a regular sanctioned 1000 Yard Match on July 25th,
1993, Robert Frey established a new 1000 yard world record. We're honored he used the Lee
Collet Die to reload his record setting ammunition.
World record breaker
Robert Frey comments: "The Lee Collet Neck Sizing Die enables me to get top accuracy
from my rifles (match and hunting). The design principle of sizing the case neck to a
mandrel is unmatched for accuracy potential by any other dies.It is one of the best ways
to make all of my rifles shoot their tightest groups."
Buy any Lee Die Set and you are entitled to
purchase a Lee Reloading Kit with Press, Priming Tool, Powder Funnel and Case Lube for as little as 53.98 36.98
SEE OFFER ON RELOADING PRESS KITS PAGE.
|
|
P.O. BOX 345 4200 CR U, HARTFORD, WI 53027 |
|
TECH HOTLINE ORDER STATUS |
![]() |
|||
Powered by Pictor Design - Published April 15, 2003 - Revised Dec 16, 2009 |
||||||