CASE CONDITIONING TOOLS
LEE CASE TRIMMER

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length Gauge (Pilot) and Shell Holder must be ordered as Case Length numbers.Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit.

CUTTER and LOCK STUD 90110  5.98 4.50
LG CUTTER W/LOCK STUD 90401  9.98 7.60
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer.	Lock Stud Cutter Shellholder Case Length Gauge

Chamfer Tool
Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of G.I. brass. Works better than tools costing several times as much.

LEE CHAMFER TOOL90109  2.98 2.30

Primer Pocket Cleaner Double ended design cleans both large and small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one. LEE POCKET PRIMER CLEANER90101  1.98 1.50 Decapper and Base Easily removes crimped in primers from military cases. Guaranteed unbreakable. DECAPPER & BASE 22 CALIBER90103  5.98 3.00 30 CALIBER90102 serv.parts

Decapping Die An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Guaranteed unbreakable decapper easily removes crimped in primers. One size fits all. Lee Decapping Die 90292 serv.parts  11.98 8.30

LEE ZIP TRIM

Lee Zip Trim

Trimming cases is a fact of life if you reload rifle cases. This task has always been accomplished with tools that require one to hand crank a cutter or resort to an expensive electric unit. The Zip Trim changes the way reloaders prepare cases for reloading. The Zip trim rotates the case like a lathe. This allows you to trim, chamfer and polish your case without having to remove the case from the tool. Other trimmers hold the case fixed and rotate the cutter. What really makes the Zip Trim unique is the crank has been thrown away and is replaced with a recoil mechanism like you would find on a small engine. One pull of the Zip Trim cord quickly trims the longest case and just part of a pull chamfers the case mouth. If you like shinny cases touch the spinning case with steel wool or polishing cloth and you get an instant jewel like finish on your case.

Zip Trim 90899   24.98 18.98

Cutter with Ball Grip 90275 

Three Jaw Chuck 90608 

Case Spinner Stud 90607 

CASE LENGTH GAGE & SHELLHOLDERS  5.50 3.80
Specify Caliber From List Of Sizes.

---

22 Hornet	90111 serv.parts	221 Fireball	90112 serv.parts
222 REM	90113 serv.parts	223 REM	90114 serv.parts
22/250	90116 serv.parts	220 Swift	90118 serv.parts
223 WSSM	90673 serv.parts	243 WSSM	90389 serv.parts
243 WIN	90119 serv.parts	6mm REM (244 Rem.)	90120 serv.parts
25/20 W.C.F.	90121 serv.parts	250 Savage (250/3000)	90122 serv.parts
257 Roberts	90123 serv.parts	25/06 REM	90124 serv.parts
		6.5 x 55 Mauser	90126 serv.parts
260 Remington	90993 serv.parts	270 WSM	90117 serv.parts
270 WIN	90128 serv.parts	284 WIN	90129 serv.parts
7mm WSM	90314 serv.parts	7 x 57 Mauser	90130 serv.parts
7mm/08	90167 serv.parts	7mm Express/280 Rem.	90166 serv.parts
7mm REM MAG	90131 serv.parts	7 x 64 Brenneke	90236 serv.parts
7.5 Swiss (Schmidt-Rubin)	90132 serv.parts	7.62 x 39 Russian	90133 serv.parts
7.62 x 54 Russian	90147 serv.parts	7.65 Mauser (Belgian-Argentine)	90134 serv.parts
30 M1 Carbine	90135 serv.parts	30/30 WIN	90136 serv.parts
30/40 Krag	90137 serv.parts	300 Savage	90138 serv.parts
308 WIN	90139 serv.parts	30/06 Springfield	90140 serv.parts
300 WSM	90034 serv.parts
300 H&H	90141 serv.parts	300 WIN MAG	90142 serv.parts
300 WHBY MAG	90143 serv.parts	303 British	90144 serv.parts
32/20 W.C.F.	90146 serv.parts	7.7 Japanese	90115 serv.parts
8 x 57 Mauser	90148 serv.parts	338 WIN MAG	90149 serv.parts
35 REM	90150 serv.parts	35 Whelen	90972 serv.parts
375 WIN	90165 serv.parts	375 H&H	90164 serv.parts
38-55	90994 serv.parts
444 Marlin	90151 serv.parts	45/70 Government	90152 serv.parts
458 Win Mag	90971 serv.parts	32 Smith & Wesson Long	90169 serv.parts
9mm Makarov	90684 serv.parts	9mm Luger	90153 serv.parts
380 Auto	90155 serv.parts	38 Smith & Wesson	90156 serv.parts
38 Special	90157 serv.parts	357 MAG	90158 serv.parts
40 S&W	90154 serv.parts	10mm Auto	90127 serv.parts
41 MAG	90159 serv.parts	44/40	90168 serv.parts
44 Special	90160 serv.parts	44 MAG	90161 serv.parts
45 ACP	90162 serv.parts	45 Colt	90163 serv.parts
454 Casull	90992 serv.parts

Unlisted case length gauges can be custom-made for $15. Case length and bullet diameter are needed. This service is available factory direct only if the case head fits an existing shell holder.

Bulge Buster Kit 90487   19.98 12.95