LEE BLACK POWDER MOLDS

LEE SHOTGUN SLUG MOLDS

Cast Minie Bullets as fast as
Round Balls

Lee Minie Bullet Mold

Improved design is easier to cast and load. Usually
more accurate; a wider variety of sizes.

LEE REAL Bullet for Muzzleloaders

RIFLINGENGRAVEDATLOADING

A solid bullet that loads easily even after many firings because of its unique cleaning action. Will not tumble.
A perfect hunting bullet with heavy loads. Easy to cast. Shoots accurately even in greatly oversize barrels.

Lee Combo Molds

Rifling . Engraved . At . Loading.

The driving bands are large enough to adequately engage the rifling when pushed into the muzzle, and thin enough to withstand maximum charges without stripping or gas cutting.

Unique Cleaning Action. You can shoot all day without cleaning your rifle between shots! When inserted into the muzzle, tiny
scraping edges are swagged forward on each driving band.

These perfect fitting scrapers remove the fouling from the previous shot.

Easier, Faster to Load.

It's easy to load straight and true, easier and faster than a round ball with patch. Easily stabilized with very light charges, the R. E. A. L. bullet also retains accuracy with maximum loads. Each band is generously tapered to the rear with an angle close to that of a lathe center, so as to
center the bullet against the rifle bands. When pushed
in, the bullet automatically centers in the bore.

More Accurate.

The bevel base of the R. E. A. L. bullet contributes to greater accuracy. When the bullet exits the bore, the gas escapes equally around the perimeter of the base. The uniform bevel is resistant to nicks that would permit gas to escape prematurely and cause a jet effect on one side of the bullet.

For black powder revolvers

Lee Conical Bullet Mold

A super accurate bullet that is easy to load straight and true. Two lube grooves prevent flash ignition and lead fouling. More energy and far greater accuracy than round balls.

WARNING

Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.

LEE SHOTGUN MOLDS

Make your own slugs for just pennies!

Load slugs for less than standard trap loads. The Lee DRIVE KEY (patent rights reserved) slug is loaded in standard trap hull with standard wad and conventional folded crimp. Slug loads are produced with any standard shot shell reloading press. Lee Slug Mold features the exclusive drive key. The drive key positively rotates the slug in rifled shotgun barrels. The key doubles as a support rib allowing use of a standard trap wad - no need for a support wad or base filler. Sabot wad design outperforms rifled slugs in rifled slug barrels. Velocity and accuracy meet and exceed expensive factory loaded rifled slugs. Molds feature self centering automatic core pins for maximum speed and convenience. Mold is complete with sprue plate, handles and complete instructions with suggested loads. Best of all, they're priced at what others charge for handlesalone!