Lee Pro 4-20
All the great features of the Pro 20 Pot, plus a generous 4 inches of clearance under the spout to accept all brands of bullet molds and most sinker molds. It also includes an adjustable mold guide to quickly and accurately position any mold for pouring.

Lee Pro 4-20 90947 110 Volt 91.98
Lee Pro 4-20 90948 220 Volt 95.98

Here's What One Satisfied Customer Had To Say About The Lee Pro 4-20!

Tom O. from Honolulu, HI:
I am writing to comment on one of your new products: The Lee Pro 20 melter. I have used your products over the years and have been impressed with the quality, value and very reasonable costs of your products. However,with your new Lee Pro 20, you have surpassed yourself. I just finished trying it out yesterday and had never had a better casting session! It is a wonderful product. I cast easier and faster with more control than any bottom pour pot I had ever used & I've tried them all. The design is beautiful in the ease & simplicity of the way it works.I do a lot of casting and depend on cast bullets for most of my needs, from the .30 Mauser pistol to the Big .50 Alaskan. The flow control works beautifully & I got wonderful results with my 650 gr. .50 cal. bullets. Thanks for producing a great new product!

WARNING

Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.

Lee Production Pot IV
Dust-tight houseing extends thermostat life

UNIQUE INFINITE HEAT CONTROL

A highly reliable control, mounted away fron the high heat of the pot. Eliminates failures usually associated with the thermostatically controlled united.Thermal feed back to the infinite control permits heater to put out full power until the metal has melted.Large, deep pot holds 10 pounds of lead. Melt time is less than 20 minutes. Pour spouts up frount where it belongs so you can see what you are doing. Infinite heat control. Uses only 500 watts of power during heat-up and a lot less to maintain temperature. Large.stable base for safety. Well suited for commercial casting, clubs, police departments, ect. This pot has features not found on more expensive melters.
Guaranteed two years. 4" of clearance under the spout is high enough to accept all brands of bullets molds and most sinker molds.

Lee Production Pot IV	110 Volt90009 75.98
Export Model	220 Volt90008 79.98

UNIVERSAL CASE EXPANDING DIE
Gently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today's high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the larges Ultra Mag. Costs so little and works so well you can't afford to be without one.

UNIVERSAL CASE EXPANDER DIE	90798 14.98

Lee Precision Melter High speed melter with an infinite heat control for the serious shooter. Easily handles 4 cavity molds. Takes less than 15 minutes to melt 4 pounds of metal. Same infinite heat control as used on the Production Pot. 500 watts AC only. Guaranteed 2 years.

Precision Melter 110V 90021 45.98 Export Model 220V 90024 49.98

Unique Infinite Heat Control
A highly reliable control, mounted away from the heat of the pot. Eliminates failures usually asociated with thermostatically controlled units. Thermal feed back to the infinite control permits heater to put out full power until the metal has melted.

Hardness Testing Kit Featured product in Chapter 10 of Modern Reloading. No more wasted components shooting too soft or too hard lead. Cast and load with confidence knowing your alloy is up to the job. Quickly and precisely check hardness of your lead alloy. Exclusive conversion chart tells the maximum operating pressure of any lead alloy. Kit includes calibrated hardened steel ball indenter "v" block cradle snaps into standard press ram 20 power 4 lens optical measuring microscope. LEE HARDNESS TESTING KIT90924 70.00

Lee Ingot Mold Use the Lee Mold to cast 1/2 and one pound ingots. Perfect for remelting and alloying. Wood handles stay cool. Aluminum mold is lightweight and rustproof. Ingot Mold90029 13.98 Lee Lead Ladle A convenient size ladle for bullet casting. Works equally well for right and left handers. Handy for skimming and stirring metal. Lead Ladle90026 4.98