|
LUBE
AND SIZING KIT
(PRESS NOT INCLUDED)
Fastest and easiest way
to lubricate and size cast bullets. Standard 7/8 x 14 threads fit
any reloading press. Bullets are pushed through the sizing die nose
first, so no special nose punches are needed. Gas checks are automatically
seated and crimped in place. Sized bullets are captured in the special
container.
A 4 oz. bottle of LEE LIQUID
ALOX LUBE
[a $2.50 value] included free, is enough for thousands of bullets.
19.98
COMPLETE FOR ONE SIZE
(PRESS NOT INCLUDED) 
Universal Case Expanding Die
13.98
90798Lee Universal Case Expanding Die
Gently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today's high performance jacketed bullets. Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the larges Ultra Mag.Costs so little and works so well you can't afford to be without one.
Lee Liquid Alox
LEE LIQUID ALOX gives better
accuracy because it eliminates leading. The lube coats the entire
bullet just like a thin jacket. It dries to a soft, varnish-like
finish that really clings. The dried coating does not degrade gunpowder.
Easy to apply and eliminates the need for sizing of most cast bullets.
While it works well with all cast or swaged bullets, it works best
with the micro band bullets, which are designed for tumble lubing.
These bullets are marked with a TL on the Bullets
page.
|
LEE
LIQUID ALOX
4 OZ. DISPENSER BOTTLE
Enough for thousands of bullets |
90177 |
3.98
|
| |
|
|
LEE
NRA FORMULA ALOX BEESWAX MIX
Contains 50% Alox 2138F and 50% commercial A-1 Beeswax. Hollow
stick fits most lubricators. Packed in handy plastic tubes.
|
|
| ONE
STICK90007
|
|
7.50
|
Meet Some
Satisfied Customers!
Thomas M. from Smithfield,
PA:
I would like to
make a statement about your Liquid Alox Bullet Lubricant. Recently,
while trying to find a cast bullet load for my 32 H&R Contender
(using commercial hard cast bullets), I found so much leading in
the throat of the barrel that even extensive scrubbing with a bronze
brush and solvent would not remove it all. I finally gave up. Deciding
to continue using these bullets, I decided to lube them with liquid
alox, as well as the original lube, in hopes it would at least reduce
further leading of the barrel.To my surprise I discovered after
my next range session that the residual leading appeared to be reduced,
and upon cleaning the pistol all traces disappeared with just two
soakings with solvent and scrubbings with the bronze brush, possibly
a half hours attention rather than the previous 8 to 10 hours applied
without success.
Thank you for
a great product! Over that past 20 years I have used numerous products
by your company> and have recommended them to my friends. Keep up
the good work and thanks again.
Mr. Evenson from Orr, MN:
Congratulations
on finally making it big in the reloading field and putting those
old complacent companies on their toes.
All of my reloading
equipment says "LEE" except a few odd items you don't
manufacture. I've always been impressed
with your designs: simple,
effective and economical. I started buying your products because
they were economical but I continue buying them because they are
the best.
Your liquid alox is great-I bought 2 cases!.....
John Y. from Ft. Walton
Bch, FL:
I have used your
equipment for many years starting with the old "Lee Loader",
which I still use for special situations.
I have 2 Lee presses and
several rifle and pistol dies plus molds for centerfire and muzzleloaders.
I was not quite
convinced that your new lube and sizing kit would work but feeling
confident that if the Lee name was on it, it would work. I bought
one, and to my delight, found that it is a miracle tool!!! Compared
to my conventional size and lube tool it is light years ahead of
all of the old types,proving again that Lee really is the innovator.
You might include in your ads that it also seats gas checks.
Every Lee Reloading Tool is unconditionally guaranteed
for two full years.
Don't pay more for less!
|
