|
LOAD
MASTER
The finest reloader made!
 |
A massive press with advanced
features. The ram is 1 3/4 inches in diameter. Stroke and clearance
sufficient for the largest magnum rifle cases. |
Precision 5-Hole Turret
with 20 locking lugs takes just seconds to
change.
90079 
14.98 |
| |
Loads rifle and pistol rounds
with equal ease. |
| |
Load progressively or singly
without spilled powder or components. |
| |
Five stations so you can
Factory Crimp and post size. |
| |
Accepts all popular brands of
dies (7/8 x 14). |
| |
Automatic indexing with a wedge
lock mechanism that will actually hold a ton. |
| |
Positive and foolproof priming
system that is easy and fast to fill. |
| |
Removable turrets. Change
calibers in seconds. |
| |
Automatic 4 tube case feeder
(Pistol calibers). |
| |
Loaded round ejector and case
catcher. |
| |
Quick change shell plate. No
tools required. |
| |
Grease and oil fittings along
with hard chrome plated ram insure a lifetime of service for even the commercial reloader.
|
|
Easy to empty primer catcher
guaranteed to catch every primer.
LEE LOAD MASTER LOADER IS PICTURES WITH OPTONAL CASE COLLATOR
Fills all four tubes in just
ten seconds. For the Pro 1000 or Load Master
90667
14.98
THIS IS A MUST HAVE ITEM WHEN YOU ORDER THE PRO 1000 OR LOADMASTER......
Load Master & Pro 1000 difference
The Main difference between the Load Master and the Pro-1000 is that the Load Master is designed to handle rifle and pistol, and the Pro 1000 is designed primarily for pistol cartridges, but will reload rifle cartridges up to 2 5/16" in overall length.
The Load Master is a five station press, the Pro 1000 is three. Both include automatic indexing, automatic primer feed and case feed, and both can be fitted with an automatic bullet feed. Both come set up with everything you need to start loading the caliber chosen. People who wish to load rifle or use the Lee Carbide Factory Crimp dies for handgun loading opt for the Load Master.
Caliber changer overs for both presses can be done in less than five minutes. The Load Master is a little more costly to purchase and to change calibers. Both presses are designed for experienced reloaders. That is not to say that a first time reloader shouldn't order one, but one should have good mechanical aptitude to start with a progressive. |
| This
press will convince you that Lee is the quality leader. Every part of this tool was
designed to be strong, long lasting, rust-resistant and user friendly. This machine is
designed for a life-time of the hardest use. |
| Shell Plate |
29.98
|
| #1s |
90907
|
38 Spl, 357 Mag.,
etc. |
| #2L |
90908
|
45 ACP, 30/06, 308,
etc. |
| #3L |
90909
|
30/30, 7 x 30
Waters, etc. |
| #4s |
90910
|
223, 222, etc.
|
| #4A |
90059
|
32 S&W Long, 32
H&R Mag., etc. |
| #5L |
90911
|
Belted Magnums, 300
Mag., etc. |
| #5A |
90085
|
303 British &
30/40 Krag |
| #6s |
90912
|
32/20, 25/20, etc.
|
| #7s |
90884
|
22 Hornet
|
| #7a |
90913
|
30 M1 Carbine, 32
ACP |
| #8L |
90914
|
45/70, 348 Win.
|
| #9L |
90915
|
41 Magnum
|
| #10L
|
90916
|
220 Swift, 6.5 Jap.
|
| #11L
|
90917
|
44 Mag., 44 Spl.,
45 Colt |
| #12L
|
90918
|
7.62 x 39, 6mm PPC,
22 PPC, etc. |
| #14L
|
90919
|
44/40, 38/40
|
| #19s
|
90920
|
9mm Luger, 40
S&W, 38 Super, etc. |
| #19L
|
90068
|
10mm Auto
|
| Check shell holder chart on Priming Tools page for further listings.
|
READY TO LOAD PISTOL
CALIBERS are equipped with carbide dies, Pro Auto-Disk Powder Measure and a case feeder.
$330.00
| 32 S&W Long, 32
H&R Magnum |
90935 |
| 9mm Luger |
90936 |
| 380 Auto |
90937 |
| 38 Spec. (will load 357
Mag.) |
90938 |
| 357 Magnum |
90939 |
| 40 S&W |
90940 |
| 10mm Auto |
90941 |
| 44 Spec. (will load 44
Mag.) |
90943 |
| 44 Magnum |
90944 |
| 45 ACP |
90945 |
| 45 Colt (will load 454
Casull) |
90946 |
|
Loaded Round Catcher |
RIFLE CALIBERS are
equipped with Lee Pace-Setter dies, Perfect Powder Measure, Universal Charge Die and case
inserter.
(WITHOUT CASE COLLATOR)$320.00
|
| 223 Remington |
90922 |
| 270 Winchester |
90926 |
| 308 Winchester |
90930 |
| 30/06 |
90931 |
Special sizes can be made with any die set listed
in this catalog for the same prices listed above. |
|
Large Primer Feeder 90077
24.98
|
Small Primer Feeder 90075
24.98
|
|
Bullet
Feed Kit
The bullet feeder designed to
directly fit the Pro 1000 and Load-Master. Automatically feeds bullets into the mouth of
the seating die. Align bullets more accurately than possible by hand. Increases the cyclic
rate 50 to 100%.The
Bullet Feed Kit is complete for one bullet diameter and range of length. To convert
to another caliber or bullet length select appropriate Feed die & finger.
Order from chart below.29.98 |
29.98
Feed Kits Complete |
Description |
14.98
Feed Die and Fingers |
| 90892 |
30 &
32 cal Bullets up to .60 long |
90885 |
| 90893 |
9mm
through .365 diameter up to .46 long |
90886 |
| 90894 |
9mm
through .365 diameter .46 to .60 long |
90887 |
| 90895 |
9mm
through .365 diameter .60 to .75 long |
90888 |
| 90896 |
40 cal
through .44 cal up to .65 long
|
90889 |
| 90897 |
40 cal
through .44 cal .65 to .80 long
|
90890 |
| 90898 |
45 cal
bullets up to .67 long |
90891 |
Every Lee Reloading Tool is unconditionally guaranteed
for two full years.
Don't pay more for less!
|
