Lee Precision Dealer Network
Factory Sales

Rifle Neck Sizing Dies

Guaranteed to load the most accurate ammunition or your money back!

36.98
Die set includes: Collet neck sizing die, dead length bullet seating die,
shell holder,powder measure, charge table and storage box.

 


17 REM 90804 22 HORNET 90705
22 PPC 90803 222 REM 90706
223 REM 90707 22/250 90708
220 SWIFT 90702 243 WIN 90709
6mm PPC 90802 6mm REM 90710
250 SAVAGE 90704 257 ROBERTS 90703
260 Remington 90974 25/06 90711
6.5 X 55 MAUSER 90712 270 WIN 90713
7mm BENCHREST 90725 7 X 57 MAUSER 90714
7mm/08 90723 7mm EXPRESS 90724
7mm REM MAG 90720 30/30 WIN 90716
308 WIN 90718 30/06 SPRINGFIELD 90715
300 WIN MAG 90722 300 H&H 90726
300 WHBY MAG 90727 7.62 X 39 RUSSIAN 90701
303 BRITISH 90717 8 X 57 MAUSER 90719
338 WIN 90721 35 REM 90728
35 WHELAN 90772 375 H& H 90729

Lee Collet Die Cutaway

There is no loading system that will load more accurate ammunition than Lee Collet Dies.
We guarantee it in writing with every set. No one but Lee has ever dared to make a guarantee like this:

SMALLEST GROUP SIZE OR YOUR MONEY BACK!

A collet squeezes the case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies.Maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. This provides the shot start pressure normally supplied by the crimp. That's why a dead length bullet seater is included to complete the most accurate reloading system ever made.These dies size only the neck to preserve the perfect fit of fire forming. Only reload cases that have been fired in your gun.

Not recommended for autoloaders, slide or lever action guns.


Meet Some Satisfied Customers!

Leo writes:
I am pleased to report a new "personal best" 3-shot group at a distance of 200 meters. The ammunition used was put together using your custom collet die & dead length bullet seater. This occurred during load development for upcoming silhouette competition.

Norm B. from Ontario, Canada:
I attended an NBRSA Shoot at the Fairchance Gun Club in Pennsylvania April 21 & 22, 1990 and used a set of your Collet dies, custom-made for my 6mm PPC with a 40 degree shoulder and a .263 neck diameter. I neck-sized in the neck-sizing Collet die and appreciated its easy adjustability for tightening up loosened necks in much reloaded brass. My bullets were seated using your dead-length seating die. In the heavy varmint 100 yard competition on Saturday, shooting conditions were good and I shot the smallest 5 group aggregate of my career. Range measure at .2008". This was good for third place in a group of around 65 top shooters. In the light varmint 100 yard ompetition in the afternoon the wind picked up a little and the groups shifted off the center of the target. My .2230" aggregate score for 5 groups was good for second place, just .0012" out of first place. Your dies performed as good as or better than the hand dies that I have been using. They are more convenient to use in some ways and treat the case necks less harshly. No competitor should feel at a disadvantage using your Collet dies even though others around them stick to the more costly hand dies.


Lee Collet Dies for neck sizing only 36.98

Robert Frey smashes world record with Lee Collet Dies

While competing in a regular sanctioned 1000 Yard Match on July 25th, 1993, Robert Frey established a new 1000 yard world record. We're honored he used the Lee Collet Die to reload his record setting ammunition.

World record breaker Robert Frey comments: "The Lee Collet Neck Sizing Die enables me to get top accuracy from my rifles (match and hunting). The design principle of sizing the case neck to a mandrel is unmatched for accuracy potential by any other dies.It is one of the best ways to make all of my rifles shoot their tightest groups."


Special Offer

Buy any Lee Die Set and you are entitled to purchase a Lee Reloading Kit with Press, Priming Tool, Powder Funnel and Case Lube for as little as 31.10

SEE OFFER ON RELOADING PRESS KITS PAGE.


Every Lee Reloading Tool is unconditionally guaranteed for two full years. Don't pay more for less!


Back to Top
Lee Dies | Die Tables | Factory Crimp | RGB Dies | Lee Loader
Lee PaceSetter Dies | Lee Collet Dies | Pistol Dies | Deluxe Rifle Die Sets
Bullet Molds | Bullet Pictures | Lubes and Sizing | Melters
Black Powder | Reloading Presses | Press Kits | Load Master
Lee Pro 1000 | Case Conditioning Tools | Priming Tools
Load All | Disk Powder Measure | Perfect Powder Measure
Modern Reloading | Lee Aniversary Kit
Deluxe Pistol Reloading Kit | Shooter Program
Shopping Cart | Lee Caps | Classic cast

HOME    
P.O. Box 270345
Hartford, WI 53027
Fax# (262) 673-0364

info@factorysales.com

Developed by Pictor Design
This publication is formatted for
Explorer 5 and Netscape 5
Published April 15, 2003
Revised
Direct product questions to Factory Sales
Direct website questions to the Webmaster
Click to browse the online catalog Click to view your shopping cart Click to learn about Factory Sales Click for links to related web sites