CASE CONDITIONING TOOLS
LEE CASE TRIMMER

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length Gauge (Pilot) and Shell Holder must be ordered as Case Length numbers.Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit.

CUTTER and LOCK STUD 90110 5.98
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer.	Lock Stud Cutter Shellholder Case Length Gauge

Chamfer Tool
Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of G.I. brass. Works better than tools costing several times as much.

LEE CHAMFER TOOL90109 2.98

Primer Pocket Cleaner Double ended design cleans both large and small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one. LEE POCKET PRIMER CLEANER901011.98 Decapper and Base Easily removes crimped in primers from military cases. Guaranteed unbreakable. DECAPPER & BASE 22 CALIBER901033.98 30 CALIBER90102

Decapping Die An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Guaranteed unbreakable decapper easily removes crimped in primers. One size fits all. Lee Decapping Die 90292 10.98

LEE ZIP TRIM

Lee Zip Trim

Trimming cases is a fact of life if you reload rifle cases. This task has always been accomplished with tools that require one to hand crank a cutter or resort to an expensive electric unit. The Zip Trim changes the way reloaders prepare cases for reloading. The Zip trim rotates the case like a lathe. This allows you to trim, chamfer and polish your case without having to remove the case from the tool. Other trimmers hold the case fixed and rotate the cutter. What really makes the Zip Trim unique is the crank has been thrown away and is replaced with a recoil mechanism like you would find on a small engine. One pull of the Zip Trim cord quickly trims the longest case and just part of a pull chamfers the case mouth. If you like shinny cases touch the spinning case with steel wool or polishing cloth and you get an instant jewel like finish on your case.

Zip Trim 90899 $24.98

Cutter with Ball Grip 90275

Three Jaw Chuck 90608

Case Spinner Stud 90607

CASE LENGTH GAGE & SHELLHOLDERS 4.98
Specify Caliber From List Of Sizes.

Unlisted case length gauges can be custom-made for $15. Case length and bullet diameter are needed. This service is available factory direct only if the case head fits an existing shell holder.